2 Motor Boat Lifts
Salty Hoist 2 Motor Boat Lifts are engineered for residential and mid-size vessels, delivering reliable lifting performance and long-term durability in saltwater environments. Each system is fabricated in-house using marine-grade aluminum with galvanized components for strength and corrosion resistance.
Available capacities range from 4,000 lb to 24,000 lb, including:
4,500 Ibs 2 Motor Lift
The 4,500 lb two motor lift is a compact, high-efficiency system designed for smaller vessels and personal watercraft. It’s commonly used for jet skis, skiffs, and light recreational setups, and is frequently paired with platform systems for kayak launching and easy waterfront access.
Lift Applications
- Single or double jet ski setups
- Small skiffs and flats boats
- Kayak launch platforms
- Light-duty residential use
Drive System & Performance
- Gearbox: AMS-4500
- Motors: Dual 1 HP stainless steel motors
- Line Configuration: 1-part line system
- Lifting Speed: ~32.95 in/min
Key Advantage:
The 1-part line setup allows for faster lifting speeds, making this one of the quickest lifts in your lineup for its size.
Engineering & Pile Spacing
- Dual top beam system utilizing 4″ aluminum structural channels
- Cradle beams constructed from 6″ x 4″ aluminum I-Beam
- Compact frame design optimized for lighter loads
- Marine-grade aluminum construction for long-term corrosion resistance
- 4-pile configuration
- Standard Front to Back spacing: –11’,8” Center to center*
- Standard Left to Right spacing: –10’,8” Center to center*
Custom spacing is available and pricing may vary depending on material amounts needed*
7,000 Ibs 2 Motor Lift
The 7,000 lb two motor lift is a high-performance upgrade designed for larger personal watercraft setups and small to mid-size boats. With increased lifting speed and power, this system is ideal for customers who want faster operation without stepping into heavier-duty lift configurations.
Lift Applications
- Double jet ski platforms with added weight
- Small to mid-size center console boats
- Flats boats and bay boats
- Customers prioritizing faster lift speeds and frequent use
Drive System & Performance
- Gearbox: AMS-4000
- Motors: Dual 1.0 HP stainless steel motors
- Line Configuration: 1-part line system
- Lifting Speed: ~32.95 in/min
Key Advantage:
The single-part line system delivers significantly faster lifting speeds than traditionally 2 part line lifts.
Engineering & Pile Spacing
- Dual top beam system utilizing 5″ aluminum structural channels
- Cradle beams constructed from 6″ x 4″ aluminum I-Beam
- Reinforced frame design to handle increased loads
- Marine-grade aluminum construction for long-term corrosion resistance
- 4-pile configuration
- Standard Front to Back spacing: –11’,8” Center to center*
- Standard Left to Right spacing: –11’,8” Center to center*
Custom spacing is available and pricing may vary depending on material amounts needed*
10,000 Ibs 2 Motor Lift
The 10,000 lb two motor lift is a full-size residential system designed for mid to large vessels. Built for strength and stability, this lift is ideal for customers stepping into heavier boats where controlled lifting and structural integrity become more important than speed.
Lift Applications
- Mid to large center console boats
- Dual console and family boats
- Heavier bay boats
Drive System & Performance
- Gearbox: AMS-4000
- Motors: Dual 1 HP stainless steel motors
- Line Configuration: 2-part line system
- Lifting Speed: ~16.48 in/min
Key Advantage:
The 2-part line configuration increases lifting power and improves load control by distributing weight more effectively across the system.
Engineering & Pile Spacing
- Dual top beam system utilizing 6″ aluminum structural channels
- Cradle beams constructed from 8″ x 5″ aluminum I-Beam
- Reinforced structural design for increased vessel weight
- Marine-grade aluminum construction for long-term corrosion resistance
- 4-pile configuration
- Standard Front to Back spacing: –11’,8” Center to center*
- Standard Left to Right spacing: –12’,2” Center to center*
Custom spacing is available and pricing may vary depending on material amounts needed*
13,000 Ibs 2 Motor Lift
The 13,000 lb two motor lift is a heavy-duty residential system designed for larger vessels that require increased lifting strength and structural support. Built for durability and control, this lift is ideal for customers with wider, heavier boats where stability and long-term performance are critical.
Lift Applications
- Larger center console boats
- Offshore fishing boats
- Dual console and family boats
- Heavier vessels with increased beam and weight
Drive System & Performance
- Gearbox: AMS-4000
- Motors: Dual 1 HP stainless steel motors
- Line Configuration: 2-part line system
- Lifting Speed: ~14–16 in/min
Key Advantage:
The 2-part line configuration increases lifting power and improves load control by distributing weight more effectively across the system.
Engineering & Pile Spacing
- Dual top beam system utilizing larger structural aluminum channels than the 10,000 lb configuration
- Cradle beams constructed from heavy-duty aluminum channel for increased support
- Reinforced frame design to handle higher loads with reduced deflection
- Marine-grade aluminum construction for long-term corrosion resistance
- 4-pile configuration
- Standard Front to Back spacing: -11’,8” Center to center*
- Standard Left to Right spacing: -12’,2” Center to center*
Custom spacing is available and pricing may vary depending on material amounts needed*
16,000 Ibs 2 Motor Lift
The 16,000 lb two motor lift is a heavy-duty system designed for large, wide, and heavier vessels that require maximum stability and lifting strength within a two motor configuration. Built for demanding applications, this lift is ideal for offshore boats and larger recreational vessels where reliability and long-term performance are critical.
Lift Applications
- Large center console boats
- Offshore fishing vessels
- Wide-beam boats
- Heavier dual console and family boats
Drive System & Performance
- Gearbox: AMS-6500
- Motors: Dual 1 HP stainless steel motors
- Line Configuration: 2-part line system
- Lifting Speed: ~12–14 in/min
Key Advantage:
The upgraded AMS-6500 gearbox provides increased torque and durability, allowing the lift to handle heavier vessels with greater efficiency and reduced mechanical strain.
Engineering & Pile Spacing
- Dual top beam system utilizing heavy-duty structural aluminum channels
- Cradle beams constructed from reinforced large-format aluminum channel
- Increased structural support to reduce flex under heavy loads
- Engineered for long-term durability in demanding marine environments
- 4-pile configuration
- Standard Front to Back spacing: -11’,8” Center to center*
- Standard Left to Right spacing: –13’,8” Center to center*
Custom spacing is available and pricing may vary depending on material amounts needed*
20,000 Ibs 2 Motor Lift
The 20,000 lb two motor lift is a high-capacity system designed for large offshore vessels and demanding waterfront applications. Built to handle substantial weight and wider beam boats, this lift represents the upper range of two motor configurations, offering strength, stability, and reliable performance under heavy loads.
Lift Applications
- Large offshore fishing boats
- Wide-beam center consoles
- Heavily loaded recreational vessels
- Applications approaching commercial-level use
Drive System & Performance
- Gearbox: AMS-6500
- Motors: Dual 1 HP stainless steel motors
- Line Configuration: 3-part line system
- Lifting Speed: ~10–12 in/min
Key Advantage:
The upgraded AMS-6500 gearbox provides increased torque and durability, allowing the lift to handle heavier vessels with greater efficiency and reduced mechanical strain.
Engineering & Pile Spacing
- Dual top beam system utilizing large-format structural aluminum channels
- Cradle beams constructed from heavy-duty reinforced aluminum channel
- Designed to minimize deflection under high loads
- Engineered for strength, durability, and long-term performance in demanding environments
- 6-pile configuration
- Standard Front to Back spacing: -13’,11” Center to center*
- Standard Left to Right spacing: -15’,8” Center to center*
All spacing measured center-to-center on pilings. Spacing may vary depending on vessel width and site conditions*
24,000 Ibs 2 Motor Lift
The 24,000 lb two motor lift is the highest-capacity system available within a two motor configuration. Designed for extremely heavy and wide vessels, this lift is built for maximum strength, stability, and durability in demanding waterfront environments.
Lift Applications
- Large offshore fishing boats
- Wide-beam vessels
- Heavily loaded recreational boats
- High-demand residential or light commercial applications
Drive System & Performance
- Gearbox: AMS-6500
- Motors: Dual 1 HP stainless steel motors
- Line Configuration: 3-part line system
- Lifting Speed: ~10–12 in/min
Key Advantage:
The upgraded AMS-6500 gearbox provides increased torque and durability, allowing the lift to handle heavier vessels with greater efficiency and reduced mechanical strain.
Engineering & Pile Spacing
- Dual top beam system utilizing large-format structural aluminum channels
- Cradle beams constructed from heavy-duty reinforced aluminum channel
- Designed to minimize deflection under high loads
- Engineered for strength, durability, and long-term performance in demanding environments
- 6-pile configuration
- Standard Front to Back spacing: –13’,11” Center to center*
- Standard Left to Right spacing: –15’,8” Center to center*
Custom spacing is available and pricing may vary depending on material amounts needed*